|
deegree-core-3.0-pre-nightly (2010/03/05 00:01) - official | |||||||||
| PREV NEXT | FRAMES NO FRAMES | |||||||||
| Classes in org.deegree.geometry.primitive.segments used by org.deegree.geometry | |
|---|---|
| Arc
An ArcString that consists of a single arc only. |
|
| ArcByBulge
An ArcStringByBulge that consists of a single arc only. |
|
| ArcByCenterPoint
Circular CurveSegment that consists of a single arc only. |
|
ArcString
CurveSegment that uses three-point circular arc interpolation. |
|
| ArcStringByBulge
Circular CurveSegment. |
|
| Bezier
Special case of a BSpline curve segment with two knots. |
|
BSpline
CurveSegment that uses either polynomial or rational interpolation. |
|
| Circle
An Arc whose ends coincide to form a simple closed loop. |
|
| CircleByCenterPoint
An ArcByCenterPoint with identical start and end angles to form a full circle. |
|
| Clothoid
A clothoid, or Cornu's spiral, is a plane CurveSegment whose curvature is a fixed function of its length. |
|
| CubicSpline
A CurveSegment that uses the control points and a set of derivative parameters to define a piecewise 3rd
degree polynomial interpolation. |
|
| CurveSegment
A CurveSegment is a portion of a Curve which uses a single interpolation method. |
|
| Geodesic
A GeodesicString that consists of a single arc only. |
|
| GeodesicString
A GeodesicString is computed from two or more positions and an interpolation using geodesics defined
from the geoid (or ellipsoid) of the coordinate reference system being used. |
|
| Knot
Used to define the basis functions of a BSpline. |
|
| LineStringSegment
A CurveSegment that is defined by two or more Points, with linear interpolation between subsequent
pairs of points. |
|
| OffsetCurve
A CurveSegment that is defined by a base Curve and an offset vector. |
|
| Classes in org.deegree.geometry.primitive.segments used by org.deegree.geometry.linearization | |
|---|---|
| Arc
An ArcString that consists of a single arc only. |
|
| CubicSpline
A CurveSegment that uses the control points and a set of derivative parameters to define a piecewise 3rd
degree polynomial interpolation. |
|
| CurveSegment
A CurveSegment is a portion of a Curve which uses a single interpolation method. |
|
| LineStringSegment
A CurveSegment that is defined by two or more Points, with linear interpolation between subsequent
pairs of points. |
|
| Classes in org.deegree.geometry.primitive.segments used by org.deegree.geometry.primitive | |
|---|---|
| CurveSegment
A CurveSegment is a portion of a Curve which uses a single interpolation method. |
|
| LineStringSegment
A CurveSegment that is defined by two or more Points, with linear interpolation between subsequent
pairs of points. |
|
| Classes in org.deegree.geometry.primitive.segments used by org.deegree.geometry.primitive.segments | |
|---|---|
| Arc
An ArcString that consists of a single arc only. |
|
| ArcByCenterPoint
Circular CurveSegment that consists of a single arc only. |
|
ArcString
CurveSegment that uses three-point circular arc interpolation. |
|
| ArcStringByBulge
Circular CurveSegment. |
|
BSpline
CurveSegment that uses either polynomial or rational interpolation. |
|
| CurveSegment
A CurveSegment is a portion of a Curve which uses a single interpolation method. |
|
| CurveSegment.CurveSegmentType
Convenience enum type for discriminating the different curve segment variants in switch statements. |
|
| GeodesicString
A GeodesicString is computed from two or more positions and an interpolation using geodesics defined
from the geoid (or ellipsoid) of the coordinate reference system being used. |
|
| Knot
Used to define the basis functions of a BSpline. |
|
| KnotType
Defines allowed values for the knots' type. |
|
| Classes in org.deegree.geometry.primitive.segments used by org.deegree.geometry.standard.composite | |
|---|---|
| CurveSegment
A CurveSegment is a portion of a Curve which uses a single interpolation method. |
|
| Classes in org.deegree.geometry.primitive.segments used by org.deegree.geometry.standard.curvesegments | |
|---|---|
| Arc
An ArcString that consists of a single arc only. |
|
| ArcByBulge
An ArcStringByBulge that consists of a single arc only. |
|
| ArcByCenterPoint
Circular CurveSegment that consists of a single arc only. |
|
ArcString
CurveSegment that uses three-point circular arc interpolation. |
|
| ArcStringByBulge
Circular CurveSegment. |
|
| Bezier
Special case of a BSpline curve segment with two knots. |
|
BSpline
CurveSegment that uses either polynomial or rational interpolation. |
|
| Circle
An Arc whose ends coincide to form a simple closed loop. |
|
| CircleByCenterPoint
An ArcByCenterPoint with identical start and end angles to form a full circle. |
|
| Clothoid
A clothoid, or Cornu's spiral, is a plane CurveSegment whose curvature is a fixed function of its length. |
|
| CubicSpline
A CurveSegment that uses the control points and a set of derivative parameters to define a piecewise 3rd
degree polynomial interpolation. |
|
| CurveSegment
A CurveSegment is a portion of a Curve which uses a single interpolation method. |
|
| CurveSegment.CurveSegmentType
Convenience enum type for discriminating the different curve segment variants in switch statements. |
|
| Geodesic
A GeodesicString that consists of a single arc only. |
|
| GeodesicString
A GeodesicString is computed from two or more positions and an interpolation using geodesics defined
from the geoid (or ellipsoid) of the coordinate reference system being used. |
|
| Knot
Used to define the basis functions of a BSpline. |
|
| LineStringSegment
A CurveSegment that is defined by two or more Points, with linear interpolation between subsequent
pairs of points. |
|
| OffsetCurve
A CurveSegment that is defined by a base Curve and an offset vector. |
|
| Classes in org.deegree.geometry.primitive.segments used by org.deegree.geometry.standard.primitive | |
|---|---|
| CurveSegment
A CurveSegment is a portion of a Curve which uses a single interpolation method. |
|
| LineStringSegment
A CurveSegment that is defined by two or more Points, with linear interpolation between subsequent
pairs of points. |
|
| Classes in org.deegree.geometry.primitive.segments used by org.deegree.gml.geometry | |
|---|---|
| CurveSegment
A CurveSegment is a portion of a Curve which uses a single interpolation method. |
|
| LineStringSegment
A CurveSegment that is defined by two or more Points, with linear interpolation between subsequent
pairs of points. |
|
| Classes in org.deegree.geometry.primitive.segments used by org.deegree.gml.geometry.refs | |
|---|---|
| CurveSegment
A CurveSegment is a portion of a Curve which uses a single interpolation method. |
|
|
deegree-core-3.0-pre-nightly (2010/03/05 00:01) - official | |||||||||
| PREV NEXT | FRAMES NO FRAMES | |||||||||